|
View: 11326|Reply: 21
|
jawatan kosong & internship di Motorola Penang
[Copy link]
|
|
|
Post Last Edit by hazryka at 14-7-2010 12:59
Makluman:
Saya dah tak terima mana2 resume lagi tuk disubmit ke HR. Sila search kerje kosong yg berkaitan di web motorola
http://www.motorolacareers.com/ and apply disitu....
Hi,
Ada keje kosong di Motorola Penang.
Blh apply directly dr web motorola or sent resume kat saya [email protected]
Sy cume blh jd referrel tuk position Engineer sahaja. Technician/Accountant kene apply kat web motorola.
Semua kerja based in Penang.
Fresh grad pun blh apply, CGPA >3.0.
Praktikal pun kene CGPA >3.0(elaun rm500/mth)
Principal Staff/Senior Staff/Senior/Software Eng
Scope of Responsibilities/Expectations
Design, implement and test for Hardware Abstraction Layer Components.
Communicate with engineering managers for project status/ issue/ action taken on routine basis.
Drive and participate in analysis of issues resolution.
Study and analyze introduction of new feature/function and provide high level solution and estimation.
Provide constructive proposal/initiative to engineering manager from technical perspective
Specific Knowledge/Skills
Ph.D. / Master抯 / Bachelor抯 Degree in Electrical / Electronics/ Telecommunications Engineering with at least 3 years working experience or equivalent.
Experience in real-time embedded development of any of the following areas: communication devices, automotive applications, industrial automation, consumer goods
Well-versed in Object Oriented Analysis and Design (OOAD) and good programming skills in UML, C / C++ and Assembly Language.
Good knowledge of microprocessors and controller design
Prior development experience with Rational Rose Real Time, Wireless (eg. Bluetooth, WiFi) and embedded Linux is an added advantage.
Candidate must be willing to work in Bayan Lepas, Penang.
Principal Staff/Senior Staff/Senior/Electrical Engineers (Req No: 89944)
Job ID 89944
Location MALAYSIA - PENANG
Job Category Electrical Engineering , Hardware Engineering
Position Type Experienced
Relocation Provided None
Education Required Unknown
Experience Required Unknown
Department Description Penang RND Electrical
Scope of Responsibilities/Expectations
Responsible for design and development of highly sophisticated communication products (2-way radios, hand phone and/ or the audio accessories) for consumers as well as professional and mission critical markets.
Define requirements/ specifications and carry out modeling, simulation, and test analyses to validate the designs.
Other responsibilities include component selection/ evaluation/ qualification, product factory introduction/ yield improvements, field testing/ resolution to design issues.
Specific Knowledge/Skills
Master抯/ Degree in Electrical/ Electronics/ Computer/ Telecommunications Engineering.
Good Knowledge in at least one of the following domains:
RF (E.g., Transmitter, Receiver, VCO/ Synthesizer, GPS, or Bluetooth)
BASEBAND (E.g., Microprocessor, DSP, Memory, Display, Camera, Power Management, or Hardware/ Software Interface)
Experience with cellular phone, notebook, PDA, audio/ visual products, WIMAX, WLAN, GSM, or EVDO technology is an added advantage.
Applicants must be willing to work in Bayan Lepas, Penang.
Principal Staff/Senior Staff/Senior/ Mechanical Engineers (Req no: 91041)
Job ID 91041
Location MALAYSIA - PENANG
Job Category Mechanical Engineering
Position Type Experienced
Relocation Provided None
Education Required Unknown
Experience Required Unknown
Scope of Responsibilities/Expectations
Responsible for the design & development of highly-sophisticated communication products for professional and mission critical markets in the commercial, government and industrial segments.
Utilize Modeling & Simulation Software to create and evaluate designs, including MOLDFLOW analysis, drop & impact simulation, and thermal stress, prior to releasing the design.
Work with a team of highly-qualified engineers to generate the overall design concept for the mechanical system as well as the detailed design of the mechanical components which include plastic parts, sheet metal stampings, castings, rubber and elastomers.
Specific Knowledge/Skills
Ph.D. / Master抯 / Bachelor抯 Degree in Mechanical / Mechatronics
Engineering, or related disciplines, with minimum 2 years of working experience or equivalent.
Must have an understanding of manufacturing and fabrication
processes in injection moldings, sheet metals, die-castings, and DFMA (Design for Manufacturability and Assembly).
Knowledge and experience in specific areas such as acoustics,
drop test & impact, latest display technologies and electromechanical
components is an added advantage.
Ability to utilize Pro / Engineer, and CAE simulation tools such as ANSYS, ABAQUS, and MOLDFLOW is an added advantage.
Senior Staff/ Senior Mechanical Engineers (Req No: 88860)
Job ID 88860
Location MALAYSIA - PENANG
Job Category Mechanical Engineering
Position Type Experienced
Relocation Provided None
Education Required Unknown
Experience Required Unknown
Department Description Penang RND
Scope of Responsibilities/Expectations
Responsible for the design & development of highly-sophisticated communication products for professional and mission critical markets in the commercial, government and industrial segments.
Utilize Modeling & Simulation Software to create and evaluate designs, including MOLDFLOW analysis, drop & impact simulation, and thermal stress, prior to releasing the design.
Work with a team of highly-qualified engineers to generate the overall design concept for the mechanical system as well as the detailed design of the mechanical components which include plastic parts, sheet metal stampings, castings, rubber and elastomers.
Specific Knowledge/Skills
Ph.D. / Master抯 / Bachelor抯 Degree in Mechanical / Mechatronics
Engineering, or related disciplines, with minimum 2 years of working experience or
equivalent. Fresh graduates will also be considered.
Must have an understanding of manufacturing and fabrication
processes in injection moldings, sheet metals, die-castings, and DFMA (Design for Manufacturability and Assembly).
Knowledge and experience in specific areas such as acoustics,
drop test & impact, latest display technologies and electromechanical
components is an added advantage.
Ability to utilize Pro / Engineer, and CAE simulation tools such as ANSYS, ABAQUS, and MOLDFLOW is an added advantage.
Candidate must be willing to work in Bayan Lepas, Penang.
Senior ATR Software Engineer (Req no: 90685)
Job ID 90685
Location MALAYSIA - PENANG
Job Category Software Engineering
Position Type Experienced
Relocation Provided None
Education Required Bachelors / Degree
Experience Required 5 - 10
Department Description Advanced technology and research responsibilities and scope.
Scope of Responsibilities/Expectations
?Perform research and implementation in applied communication technology
?Perform modeling and simulation in research and applications.
?Perform embedded software development and digital radio communications.
?Perform proof of concept in the adoption of new technology.
?Support the development of radio communication products and technology.
Specific Knowledge/Skills
Candidate must possess at least a Bachelor's Degree, Electrical / Electronics / Computer Engineering with experience in software development.
Post Graduate Diploma, Professional Degree, Master's Degree or Doctorate (PhD) in qualifications preferred.
Able to do applied research in communication technologies.
Able to develop software using C / C++ in the following areas of expertise:
-Embedded real time softwareModeling
- Digital signal processing
Knowledge in telecommunications technology is an added advantage
(Computer/Telecommunication) or equivalent.
At least 5 year(s) of working experience in the related field is required for this position.
1 Full-Time positions available.
Candidate must be willing to work in Bayan Lepas, Penang.
|
|
|
|
|
|
|
|
|
|
|
|
Internship (Electrical/Electronics Engineering)
Job ID 81128
Location MALAYSIA - PENANG
Job Category Electrical Engineering
Position Type Intern
Relocation Provided None
Education Required Bachelors / Degree
Experience Required Unknown
Department Description Students will undergo internship program in Motorola Technology in Penang subject to academic requirements that fit the project assigned.
Scope of Responsibilities/Expectations
This will be discussed if student is identified to undergo internship program in Motorola
Specific Knowledge/Skills
Students with good academic results (CGPA > 3.0) in Electrical, Electronics, Mechatronics, Communication & Telecommunication Engineering ence are strongly encouraged to apply.
Please state the start date and end date of your internship in your application. Only short-listed candidates will be notified.
*MYS - Internship (Mechanical Engineering)
Job ID 81127
Location MALAYSIA - PENANG
Job Category Mechanical Engineering
Position Type Intern
Relocation Provided None
Education Required Bachelors / Degree
Experience Required Unknown
Department Description Students will undergo internship program in Motorola Technology in Penang subject to academic requirements that fit the project assigned.
Scope of Responsibilities/Expectations
This will be discussed if student is identified to undergo internship program in Motorola
Specific Knowledge/Skills
Students with good academic results (CGPA > 3.0) in Mechanical, Mechatronics, Material & Science are strongly encouraged to apply.
Please state the start date and end date of your internship in your application. Only short-listed candidates will be notified.
*MYS - Internship (Manufacturing Engineering)
Job ID 81130
Location MALAYSIA - PENANG
Job Category Mechanical Engineering
Position Type Intern
Relocation Provided None
Education Required Bachelors / Degree
Experience Required Unknown
Department Description Students will undergo internship program in Motorola Technology in Penang subject to academic requirements that fit the project assigned.
Scope of Responsibilities/Expectations
This will be discussed if student is identified to undergo internship program in Motorola
Specific Knowledge/Skills
Students with good academic results (CGPA > 3.0) in Manufacturing & Mechanical Engineering are strongly encouraged to apply.
Please state your start date and end date of your internship in your application.
Only short-listed candidates will be notified.
*MYS - Internship (Non-Technical - Finance, Operations, Business etc)
Job ID 81131
Location MALAYSIA - PENANG
Job Category Mechanical Engineering
Position Type Intern
Relocation Provided None
Education Required Bachelors / Degree
Experience Required Unknown
Department Description Students will undergo internship program in Motorola Technology in Penang subject to academic requirements that fit the project assigned.
Scope of Responsibilities/Expectations
This will be discussed if student is identified to undergo internship program in Motorola
Specific Knowledge/Skills
Students with good academic results (CGPA > 3.0) in Finance, Operations Management, Business, HR and Other major are strongly encouraged to apply.
Please state the start date and end date of your internship in your application.
Only short-listed candidates will be notified.
*MYS - Internship (Software Engineering / Computer Science/ IT)
Job ID 81129
Location MALAYSIA - PENANG
Job Category Software Engineering , Information Technology , Electrical Engineering
Position Type Intern
Relocation Provided None
Education Required Bachelors / Degree
Experience Required Unknown
Department Description Students will undergo internship program in Motorola Technology in Penang subject to academic requirements that fit the project assigned.
Scope of Responsibilities/Expectations
This will be discussed if student is identified to undergo internship program in Motorola
Specific Knowledge/Skills
Students with good academic results (CGPA > 3.0) in Software Engineering, Computer Science, Electrical Engineering & Information Technology with interest in Software are strongly encouraged to apply.
Please state your start and end date of your internship in your application.
Only short-listed candidates will be notified. |
|
|
|
|
|
|
|
|
|
|
|
NPI Product Engineer (Req No: 89262)
Job ID 89262
Location MALAYSIA - PENANG
Job Category Mechanical Engineering
Position Type Experienced
Relocation Provided None
Education Required Bachelors / Degree
Experience Required 1 - 3
Department Description Penang NPI department
Scope of Responsibilities/Expectations
Drive concurrent engineering activities to ensure product design requirements align with manufacturing requirements (Bring forward ideas from concept requirement to mass product application by ensuring Program schedules, quality and cost are met.)
Utilize FMEA and DFx methodology to provide critical analysis of manufacturing processes and generate improvement actions, post mortem evaluation and continuous improvement study.
Develop best in class manufacturing processes and assembly fixtures to incorporate the latest manufacturing technology and practices for implementation into Motorola Manufacturing to support New Product manufacturing requirements
Hands-on experience in product builds, troubleshooting, maintenance and optimization of NPI production process.
Continuously develop and seek new process breakthroughs that improve quality, productivity and cost
Generate and update engineering documentation and technical papers for internal and external symposiums.
Specific Knowledge/Skills
Candidate must possess at least a Master抯 / Bachelor抯 Degree in Mechanical / Manufacturing Engineering.
Minimum 1 year of working experience in the related field is required for this position.
Excellent communication, organization, reporting and analytical skills individuals with strong personal interaction skills are encouraged to apply.
Experience / knowledge in the following technology / methodology is an added advantage:
- Mechanical assembly / Box build process / equipment.
- Statistical tools such as FMEA, SPC, DOE.
- Design for Manufacturing and Assembly guideline / design rules.
- Knowledge of assembly tools, fixtures and jigs.
- Basic knowledge of product tolerance analysis
Able to work on concurrent engineering activities / develop new technology
Self motivated with high level of initiative and energy
Applicants must be willing to work in Bayan Lepas.
Applicants should be Malaysian citizens or hold relevant residence status.
---------------------------------------------------------------------------------
NPI Technician (Job ID: 90374)
Job ID 90374
Location MALAYSIA - PENANG
Job Category Admin Support
Position Type Experienced
Relocation Provided None
Education Required Unknown
Experience Required Unknown
Scope of Responsibilities/Expectations
Candidate must possess at least a Diploma or Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic) or equivalent.
At least 3-5 year(s) of working experience in the related field is required for this position.
Applicants should be Malaysian citizens or hold relevant residence status.
Preferably Junior Executives specializing in Engineering - Electrical or equivalent.
Basic knowledge on various mechanical and electrical categories
Good Computer skills using Microsoft Office Software
Effective communication skills
Good sense of ownership and team working spirit
Working experience in Manufacturing is preffered
3 Full-Time positions available.
Specific Knowledge/Skills
Get NPI program Kit# from NPI-SR
Sort out the unique part list based on the kit# provided by NPI-SR
Get the part sourcing plan/vendor selected from NPI-SR
Get the part risk information from NPI-SR
Load the unique part list in Qualification Tracker
Set part qualification goal date based on NPI-SR input
Assign SDE owner to each part
Collect qualification package for low risk part from vendors
Check W18 and PAF readiness status ( W18 - by W18 team and PAF - DE )
Check PPAP and PSO readiness with SDE for H/M risk parts
Raise and follow up full approval of qualification ECN in PDM1 system |
|
|
|
|
|
|
|
|
|
|
|
Accountant
Scope of Responsibilities/Expectations
- Support back end accounting for Business Finance
- Completion of accounts reconciliation
- Month-end closing for assigned areas
- Drive for process improvements
- Participate in ad hoc projects
Specific Knowledge/Skills
- Degree or professional qualification with 3 - 6 years experience.
- Audit experience would be an added advantage.
- Strong communication skill and able to interact with all level of staffs.
- Strong analytical and problem solving skills. Meticulous for details.
- Self-motivated, assertive and results driven with ability to manage multiple tasks and deadlines
Product Engineers
Job ID 89805
Location MALAYSIA - PENANG
Job Category Manufacturing
Position Type Experienced
Relocation Provided None
Education Required Bachelors / Degree
Experience Required 1 - 3
Department Description Supply Chain Technical Operation
Scope of Responsibilities/Expectations
- Support SQDC(Safety, Quality, Delivery, Cost)
- Support NPI/RND Engineering/PCN projects
- Involve in solving customer feedback/issues.
- Provide training and guidance to manufacturing team(Technicians, operators) for efficiency works.
Specific Knowledge/Skills
- RF/Basic electronics design concept and knowledge
- Basic usage of measurement equipments like DVM, Signal Generator, Spetrum Analyzer, etc will be advance
- Problem solving skills (8D, DMAIC, Fishbone, etc)
- Preference in statistical/6-sigma knowledge |
|
|
|
|
|
|
|
|
|
|
|
jom la reramai apply...
meriahkan Penang...
kat sini benefit mcm company MNC yg lainla...
70% subsidy dr interest loan kereta(pay every month)
internet rm90/mth
naik gaji every year,ikut performance...5-20% based on basic salary.
Naik gred 20% naik gaji based on basic salary
Bonus fixed 1.5 mth/year
Bonus performance ikut performance sendiri, department n bisnes motorola(per year)
So, setahun 2x bonus
Kalau nak praktikal, better apply kat sini..Kalau performance OK, manager terus serap sbg permanent staff
Yg tak best....
-Engineer kene buat technical paper, patent
-Senior kene buat side project every team |
|
|
|
|
|
|
|
|
|
|
|
Hzryka..
post post mc HR admin ada tak? Sr Exec level? atau yg bukan engineerinng or technical la..
teringin nk join org motorolla.. |
|
|
|
|
|
|
|
|
|
|
|
Reply 6# manisah
tu sy tak pasti..maybe awak leh browse kat web motorola yg sy bg tu...
yg sy pasti accountant ada...HR tak pasti plak... |
|
|
|
|
|
|
|
|
|
|
|
|
betol ke email tu,asyik mail fail je |
|
|
|
|
|
|
|
|
|
|
|
Post Last Edit by hazryka at 14-7-2010 12:59
Reply 8# pr3d4tor
maaf....sy dh edit email address tu....
kalau blh anta kat yahoo mail la..
[email protected]
utk mgelakkan inbox sy penuh.... |
|
|
|
|
|
|
|
|
|
|
|
kalo cgpa 2.9 ++ boleh spply x?
 |
|
|
|
|
|
|
|
|
|
|
|
tula...ramai yg anta resume kat sy CGPA <3.0, 2.9++ laa...
setakat ni takder sape yg dipanggil interview, tapi saya hantar jugak resume tu...
Kite cuba aje.....
mungkin Final Year Projek/experience industrial training dia blh membantu...
Tapi jgn terlalu bharap sgt laa..... |
|
|
|
|
|
|
|
|
|
|
|
|
saya punya cgpa pon 2.9++,dah anta kt bro resume.kalau ada rezeki ada la.selalunya berapa lama kalau dah anta resume nak dipanggil intebiu? |
|
|
|
|
|
|
|
|
|
|
|
masih kosong lg ker?
aku nk apply utk adik aku ni
pointer dia 3lebih
tp ppuanlah...
susah dpt keje eng ni |
|
|
|
|
|
|
|
|
|
|
|
saya dah email..
plz check email.
tq |
|
|
|
|
|
|
|
|
|
|
|
akak ada submit beberapa resume freshie <3.0 pointer kat HR...
tapi mereka reject la...
Bidang/experience yg tak berapa related ngn bisnes motorola puntak diterima...
Mcm bidang manufacturing, IC design...
Sorry yerr.... |
|
|
|
|
|
|
|
|
|
|
|
salam,
yg adik saya punya pun HR reject ker? |
|
|
|
|
|
|
|
|
|
|
|
adik awak nama apa yer??
kalau yg Firdaus binti ABdullah tu HR terima resume die...
Sila tunggu utk dipanggil interview... |
|
|
|
|
|
|
|
|
|
|
|
adik awak nama apa yer??
kalau yg Firdaus binti ABdullah tu HR terima resume die...
Sila tungg ...
hazryka Post at 29-6-2010 13:13 
A'a yg itulah...
Ooh..terima kasih.
Moga2 dipanggil interview.
 |
|
|
|
|
|
|
|
|
|
|
|
Nak inform 3 July (sabtu ni), ada walk in interview Motorola
Masa : 8.30am -3pm
Venue : motorola Cyberplex(Motorola Mayang Mall, Bayan baru)
Position : Software/Electrical/Mechanical eng
Sorry, inform lambat...baru dpt email |
|
|
|
|
|
|
|
|
|
| |
Category: Belia & Informasi
|
Post time 16-6-2010 03:32 PM
变色卡
Author
