CARI Infonet

 Forgot password?
 Register

ADVERTISEMENT

View: 2472|Reply: 1

MY MacBook Air SSD upgrade

[Copy link]
Post time 12-1-2018 06:03 PM | Show all posts |Read mode
Believe me when I say this – Macs can be upgraded too. I am using a MacBook Air 11-inch from mid-2013, with a 128GB SSD, which is clearly insufficient. Transcend has come up with a real simple but pretty useful way to overcome this bottleneck. Transcend’s JetDrive 820 is an upgrade in both storage and speed, armed with the PCIe Gen 3.0 interface, delivering read and write speeds of up to 950MB per second. It is the native PCIe SSD upgrade that Mac enthusiasts have been waiting for, with capacities ranging up to 960GB and today I got this 240GB version for my upgrade.

The JetDrive 820 comes with a five-year warranty and is compatible with the following Macs:
•MacBook Air (11- and 13-inch): Mid 2013-2017 (6,1 / 6,2 / 7,1 / 7,2)
•MacBook Pro with Retina Display (13- and 15-inch): Late 2013 – Mid 2015 (11,1 / 11,2 / 11,3 / 11,4 / 11,5 / 12,1)
•Mac mini: Late 2014 (7,1)
•Mac Pro: Late 2013 (6,1)



First, let’s talk specs. The Transcend JetDrive 820 is made with the latest 3D NAND flash technology and is offered in capacities of up to 960GB. Its read and write speeds can reach up to 950MB/s. It is faster than any SATA 3-based SSDs out there.



At the top side, you can see that there is a Nanya DRAM chip and a bank of NAND flash chips.



The package includes two screwdrivers – one with a P5 bit and another with a T5 bit. That means you don’t need to own any sort of special screwdriver set to open up the machine. However, as Transcend has stated, upgrading a Mac Pro or Mac mini requires additional screwdrivers. Though, you can purchase them separately on the Transcend website.



The JetDrive 820 is a straight swap for the original.



JetDrive Toolbox software
They developed their own tailor-made software to let you monitor the SSD’s health, enable TRIM, and even upgrade its firmware.



You had better to install the JetDrive Toolbox software because you need to enable TRIM. The only way you can enable TRIM is through this software. This is to prolong your SSD’s life span.



There are two ways to do the migration – either by creating a full carbon copy image to an external storage device with SuperDuper! and restore it after the SSDs have been swapped, or through Time Machine.



The data cloning process might take a couple of hours, but the actual installation should take less than half an hour. You want to do the installation in a clean place with enough free time without distractions to complete the process end-to-end. Although SSD is expensive, the performance is spectacular - especially since Apple has incorporated PCI Express (PCIe)-based flash storage in newer models. I am happy that Transcend is offering an alternative to the market and it works great on my MacBook Air.

Reply

Use magic Report


ADVERTISEMENT


Post time 16-3-2018 12:50 PM | Show all posts
*lol* what a bottleneck combination
Reply

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

 

ADVERTISEMENT



 

ADVERTISEMENT


 


ADVERTISEMENT
Follow Us

ADVERTISEMENT


Mobile|Archiver|Mobile*default|About Us|CARI Infonet

29-3-2024 07:10 AM GMT+8 , Processed in 0.048277 second(s), 25 queries .

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

Quick Reply To Top Return to the list