How To : nak letak password kat Wireless Router.

samax

salam
camna nak set password kat wireless streamyx router aku supaya jiran-jiran sebelah umah takleh guna secara free? tq in advanced

[ Last edited by  bzzts at 25-6-2008 05:42 PM ]

sixfullbar

kena setting kat access point tu (atau router), cari menu security.

ohya, ko kena access web menu router terlebih dahulu untuk dapat menu2 ni

part ni kena baca manual (setiap model lain cara, tapi semuanya secara asas merujuk benda yg sama).set WPA encryption macam tu..etc

ni wireless router yg datang dengan pakaej streamyx wireless tu ker?

[ Last edited by  sixfullbar at 25-6-2008 04:37 PM ]

True-X

alaa sedekah je lahhh .. lagi pon ko tetap kene bayo banyak tuh gak...

sixfullbar

tak pun kongsi2

masalah utama ni time kita nak guna, org lain tengah hogging bandwidth kita..so result dia kita surf pun dapat slow jer..dahlah streamyx bukan laju mana pun

samax

Originally posted by True-X at 25-6-2008 04:35 PM
alaa sedekah je lahhh .. lagi pon ko tetap kene bayo banyak tuh gak...

bayo tu memnglah sama..tapi biler ramai org guna maka ia melembapkan kelajuan mengesurf internet aku

bzzts

router ko brand apa? ko leh masuk router ko, dan cari Wireless>Security> enablekan WEP atau WPA.

ko check bende tu dulu.. kalo jumpa, update sini.

nnt aku merge ngan topik yg dah ada.

jeppa

xpayah la letak password, sama sama la kita kongsi... dapat gak pahala.

bzzts

kalo org tu download porno, kita kongsi dosa sama-sama...

jeppa

haah... ye x ya gak
bukan apa, aku x main benda2 camtu

bzzts

satu lagi sebab, takut jadi macam ni : http://forum3.cari.com.my/viewthread.php?tid=360553

samax

D-LINK Dir 300

leh bgtau step by step tak ? tak jumpa ..Masuk router tu kat mana? device manager ke?

farishaziqi

taip ip 192.168.1.1 kat browser ko kalau tak bole try ip nie 192.168.2.1 biase nyer 2 ip tu default dddia

RTFM dulu kalau ko pandai buat mac filtering sekali kalau sekadar WEP tak secure pakai WPA tapi kalau bubuh password lambat skit better bubuh mac filtering jer

katakpuruz

salam..

Ada try cari dalam internet tentang cara2 nak setup password pada router, tapi ada 'bahasa IT' yang tak faham..

yang aku faham,
1) kena pastikan router signal dalam keadaan baik dan biarkan ia dalam default setting.
2) pastikan diantara pc dan router disambungkan (wire).
3) mana nak cari router setting? ada pada admin page....??!!

Sampai step 3 aku dah terkantoi sbb tak faham..ada sesape yang baik hati boleh post step by step tutorial? senang skit nak follow especially yang rabun IT mcm aku.

Thanks in advance.

Re: How to setup a password?      

To set up your wireless, at first, leave the router at its default settings, and then use your pc to connect wirelessly to the router.  Test your wireless Internet connection and make sure it is working correctly.  You must have a properly working wireless connection before setting up wireless security.

To set up wireless security, you must use a computer that is wired to the router.

Where to find the router settings: The router's login password is usually on one of the "Administration" pages.  The other settings are all found in the "Wireless" section of the router's setup pages, located at 192.168.1.1  

Give your router a unique SSID.  Don't use "linksys".
"SSID Broadcast" should be set to "enabled".
Retest the system, and make sure your wireless Internet connection still works.

To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.
  
Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support.  Common encryption methods are:

WEP - poor  (see note below)
WPA  (sometimes called PSK) - good
WPA2  (sometimes called PSK2) - best

WPA and WPA2 sometimes come in versions of "personal" and "enterprise".   Most home users should use "personal".  Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES.  With any encryption method, you will need to supply a key (sometimes called a "password" ).

The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.

Retest your system and verify that your wireless Internet connection is still working correctly.

For additional security, on many routers, you can limit wireless access to just the MAC addresses of the wireless devices that you own.  If possible, you should also use this feature.

And don't forget to give your router a new login password.

Picking Passwords: You should never use a dictionary word as a password.  If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers.  A login password, should be 12 characters or more.  WPA and WPA2 passwords should be at least 32 characters.

Most home users should have their routers set so that "remote management" of the router is disabled.  If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.

Note:
WEP is no longer recommended.  The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet.  Even a long random character password will not protect you with WEP.  You should be using WPA or preferably WPA2 encryption.

Credit to, linksys forum,
toomanydonuts
Network Administrator